Parker-Rod-Seals

Parker Rod Seals

Parker offers a wide range of hydraulic and pneumatic rod seal profiles to meet the broad demands of the fluid power industry. These rod seals are offered in a variety of compounds and lip geometries for the best possible solution for a given application. A majority of Parker rod seals are manufactured utilizing a precision knife trim process to ensure the sealing contact with the dynamic surface yields the best possible performance. When combined with other Parker profiles, including bearings, buffer seals, dirt excluders, and static gland seals, Parker rod seals have proven to provide long life and leak free performance.

BD Profile, Premium O-ring Energized Lip Seal

The BD profile is a non-symmetrical profile rod seal. Its rectangular shaped cross section ensures stability in the gland. The o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications.

BT Profile, Premium U-Cup Rod Seal with Secondary Stabilizing Lip

The BT profile is a non-symmetrical design for use in hydraulic rod sealing applications. Using Finite Element Analysis, the BT profile was designed to provide improved sealing performance and stability in the gland. A knife trimming process is used to form the beveled lip which is best for removing fluid from the rod.

BS Profile, Premium U-Cup Rod Seal with Secondary Stabilizing Lip

The BS profile is a non-symmetrical profile designed for use in hydraulic rod sealing applications. A knife trimmed beveled sealing lip does an excellent job wiping fluid from the rod. In addition, a secondary sealing lip is located just above the base of the seal to provide enhanced sealing performance and ensure a tight, stable fit in the gland.

B3 Profile, U-Cup Rod Seal

The B3 profile is a non-symmetrical design for use in hydraulic rod sealing applications. The diameter of the B3 profile is designed to ensure a tight static side seal when installed. The knife trimmed, beveled lip does an excellent job wiping fluid film. The B3 profile is available in Parker proprietary compounds offering extrusion resistance, long wear, and low compression set.

UR Profile, Industrial U-Cup Rod Seal

The UR profile is a non-symmetrical, hydraulic cylinder rod seal. The knife trimmed, beveled lip faces the rod to provide enhanced low to high pressure sealing and wiping action. The UR profile is an economical choice, available in Parker’s wear and extrusion resistant Molythane compound.

E5 Profile, Premium Rounded Lip U-Cup Rod Seal

Parker’s E5 profile is a non-symmetrical rod seal designed to seal both lubricated and non-lubricated air. To ensure that critical surfaces retain lubrication, the radius edge of the lip is designed to hydroplane over pre-lubricated surfaces. The standard compound for the E5 profile is Parker’s proprietary Nitroxile® extreme low friction (“ELF”) compound N4274A85.

TR Profile (Rod T-seal) Compact Seal with Anti-Extrusion Tecnology

Parker’s rod T-seal is designed to retrofit o-rings in no back-up, single back-up and two back-up standard industrial reciprocating glands.  Its compact design provides improved stability and extrusion resistance in dynamic fluid sealing applications.  The flange or base of the T-seal forms a tight seal in the gland and supports the anti-extrusion back-up rings.

ON Profile, PTFE Rod Cap Seal

The Parker ON profile is a bi-directional PTFE rod seal for use in low to medium duty hydraulic systems.  The ON profile is a simple two piece design comprised of a standard size Parker o-ring energizing a wear resistant PTFE cap.  The ON profile offers long wear and low friction, and because of its short assembly length, requires minimal space in the rod housing.

CR Profile, PTFE Rod Cap Seal To Retrofit O-ring Glands

The Parker CR profile is a cap seal with anti-extrusion, low friction and low wear features.  The seal is a bi-directional rod seal for use in pneumatic and low to medium duty applications.  Because of its short assembly length, it requires minimal space in the rod housing.

OC Profile, Compact PTFE Rod Cap Seal

The Parker OC profile is a bi-directional rod seal for use in pneumatic and low to medium duty hydraulic systems.  The OC profile is a two piece design utilizing a rectangular PTFE cap and standard size Parker o-ring.  The OC profile is an excellent choice for applications requiring a compact design.  The unique properties of the modified PTFE provide added wear resistance for improved cycle life.

BR Profile, Premium Buffer Seal

The BR profile is a compact rod seal designed to act as a buffer seal for the primary rod seal.  As a buffer seal, the BR profile provides the majority of the rod sealing performance while allowing fluid to by pass onto and energize the primary rod seal.  Fluid located between the BR profile and the rod seal will relieve back into the cylinder by flowing past the BR profile’s flexible static side lip and slotted pedestals.

OD Profile, PTFE Buffer Seal

The Parker OD profile is a rod seal that can be used as a buffer seal in conjunction with a primary rod seal or in tandem with itself to form a sealing system for higher performance.  The OD profile is a uni-directional seal, with a unique design that allows trapped fluid pressure back into the cylinder.  When the rod extends from the cylinder the OD profile is riding on a sealing point, creating a high compression point to limit leakage.

V6 Profile Cushion Seal

The V6 profile provides a check valve type action for use in cushioning pneumatic cylinders.  The V6 profile seals against the cushioning piston or spud, allowing pneumatic pressure to build and cushion the cylinder’s end stroke.  Through a series of slots and pedestals the intake flow is then able to easily blow past the cushion seal to fill the cylinder.

OR Profile, Rottary PTFE Cap Seal

The Parker OR profile is a bi-directional rod seal for use in pneumatic and low to medium duty rotary or oscillating applications.  The OR profile is a two piece design comprised of a standard size o-ring energizing a wear resistant PTFE cap.  The OR profile offers long wear and low friction without stick-slip.  This PTFE outer diameter is designed with a special interference with the o-ring to eliminate spinning between the o-ring and seal.

Fluid Power Seals--electric motors--Parker Rod Seals 1Fluid Power Seals--electric motors--Parker Rod Seals 2

Download the Warranty

This warranty comprises the sole and entire warranty pertaining to items provided hereunder. seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other warranties, including but not limited to, merchant ability and fitness for purpose, whether expressed, implied, or arising by operation of law, trade usage, or course of dealing are hereby disclaimed. Notwithstanding the foregoing, there are no warranties whatsoever on items built or acquired wholly or partially, to buyer’s designs or specifications.

Limitation of remedy: Seller’s  Liability arising from or in any way connected with the items sold or this contract shall be limited exclusively to repair or replacement of the items sold or refund of the purchase price paid by buyer, at seller’s sole option. In no event shall seller be liable for any incidental, consequential or special damages of any kind or nature whatsoever, including but not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether alleged to arise from breach of contract, expressed or implied warranty, or in tort, including without limitation, negligence, failure to warn or strict liability.

Request a Free Quote

We will begin working on your RFQ and will provide updates on our progress.